Plastic Shelving with Vented Shelves - 1625mm High x 610mm Deep Bays

Heavy duty plastic shelving units with protective coated strong box section electroplated steel frame and antibacterial coated removable vented plastic shelves. An ideal system for use in hygienic environments where heavier loads need to be stored.

• Simple assembly plastic shelving units that can be cleaned by a commercial or utensil dishwasher
• Strong and robust shelving for use in hospitals, kitchens, and cold stores
• Resistant to moisture, grease, acids and alkalis
• Fully adjustable system - shelves can be adjusted in 25mm increments
• Boltless assembly method - no special tools required
• NSF accreditation
• 4 x shelf levels
• Vented shelves allow circulation of air and light penetration
  
• Shelf load capacity: 360kg (UDL)
• Bay load capacity: 1400kg (UDL)
• Temperature range: -30^oC to +90^oC
• Suitable for use in freezer rooms and cold stores
• Also available with solid shelves (shelves can be mixed and matched within the same bay)
• Choose from 8 sizes:
• Plastic Shelf Unit - 1625mm(h) x 610mm(w) x 610mm(d) Vented Shelves
  
• Plastic Shelf Unit - 1625mm(h) x 760mm(w) x 610mm(d) Vented Shelves
• Plastic Shelf Unit - 1625mm(h) x 915mm(w) x 610mm(d) Vented Shelves
• Plastic Shelf Unit - 1625mm(h) x 1070mm(w) x 610mm(d) Vented Shelves
• Plastic Shelf Unit - 1625mm(h) x 1220mm(w) x 610mm(d) Vented Shelves
• Plastic Shelf Unit - 1625mm(h) x 1370mm(w) x 610mm(d) Vented Shelves
• Plastic Shelf Unit - 1625mm(h) x 1520mm(w) x 610mm(d) Vented Shelves
• Plastic Shelf Unit - 1625mm(h) x 1820mm(w) x 610mm(d) Vented Shelves

Manufacturing Process

Mild steel is washed and coated with Zinc substrate for extra protection, then coated with polyester powder resin which is hard baked to form a hard wearing corrosion resistant finish that is guaranteed for up to 10 years. This process is applied to shelves and posts to provide all-round protection and lasts 5 times longer than nylon coating.

Antibacterial Coating

Tested to confirm that manufacturing process has antibacterial effect; tests showed 99% growth retardation or more of E.coli and Staphylococcus aureus, Streptococcus pyogenes, Salmonella choleraesius, Klebsiella pneumonia and Pseudomonas aeruginosa.